Free stencils / Skull

Skull tattoo stencil: a human skull seen from the front, with the eye sockets, nasal opening, cheekbones and upper teeth

Skull tattoo stencil

A human skull face-on: both eye sockets, the nasal opening, the cheekbones and the row of upper teeth.

Printed size
12 × 13.4 cm (4.7 × 5.3 in)
Line width
about 0.6 mm
File
PNG, 300 dpi, pure black on white

Free, no account. Print the page at 100% scale and the design comes out at the size above.

Change the size, thicken the lines or mirror it in the stencil maker

What is in this stencil

The sockets and the nose are left open as outlines, ready for you to fill or shade.

The cracks and sutures of the bone come out as fine lines. Lower Detail in the stencil maker for a cleaner skull.

Sizes and line widths

The same stencil at each width the stencil maker offers, with its estimate of how thick the lines print. About 0.5 mm is the practical minimum for stencil paper.

Printed sizeLines
5 × 5.6 cm2.0 × 2.2 inabout 0.4 mmLines this thin often fail to transfer. Raise the line thickness in the stencil maker.
8 × 9 cm3.1 × 3.5 inabout 0.5 mm
12 × 13.4 cm4.7 × 5.3 inabout 0.6 mmThe size of the download on this page.
15 × 16.8 cm5.9 × 6.6 inabout 0.6 mm
19 × 21.3 cm7.5 × 8.4 inabout 0.7 mm

Where it came from

The photo this stencil was traced from: a human skull seen from the front

This stencil was traced from a photo of a human skull seen from the front, taken by lisafree54 and shared on Flickr. The photo was cropped to the subject and run through the Stenciline stencil maker at its standard settings. No lines were added or redrawn by hand.

You can do the same with any photo or drawing of your own.

Questions

Is this skull stencil free to use?

Yes. Download it, print it and tattoo it, for yourself or for clients. It was traced from a photo by lisafree54 published under CC0, a public-domain dedication, so it is free to use, including commercially.

How do I print it at the right size?

Download the A4 or US Letter page and print it on that paper at 100% scale ("actual size"), not "fit to page". The design should then measure 12 cm across. Run the printed sheet through a thermal printer, or trace it by hand onto stencil paper.

Can I get it bigger, smaller or mirrored?

Yes. Open it in the stencil maker, where you can change the print width, thicken the lines, mirror it for transfer and download the page again. Nothing is uploaded when you do this.

More stencils

Make one from your own photo

Upload a photo or a drawing and get a stencil like this one at the size you need. Free, no account.

Open the stencil maker